HOW TO PREPARE A POWER FLOATED FLOOR FOR PAINTING? The best way is to track blast the floor as a power floated floor has a very hard surface that prevents paint from etching in. Or you can Scarify the floor prior to painting Or A cost effective way is to Sand the floor back Use […]
HOW TO PREPARE A PAINTED FLOOR AND WHAT PRODUCTS TO USE First you need to abrade the floor with sand paper or an industrial scarifier. Then remove any loose pieces and sweep the floor to remove any dust. Then apply your first coat and allow 12-24 hours to dry before […]
FLOOR PREPARATION FOR NON-SLIP FLOOR PAINTS Excellent for areas prone to moisture and spillages Be cautious of using solvent based two pack epoxy over existing floor coatings as solvents may attack the existing paint. If un-sure use solvent free or single pack floor paint. Two coats of paint are always […]
Painting Bare Concrete Floors with Solvent Based Two Pack Epoxy Floor Coating (Suitable for all traffic) Two coats of paint are always recommended 1st coat primes and seals the floor. 2nd coat provides good colour build, protection and longevity of the coating. Be cautious of using solvent based two pack epoxy […]
Painting Bare Concrete Floors with Solvent Free Two Pack Epoxy Floor Coating (Suitable for all traffic) Two coats of paint are always recommended 1st coat primes and seals the floor. 2nd coat provides good colour build, protection and longevity of the coating. Solvent Free Epoxy Floor Paints When painting any […]
Painting Bare Concrete Floors with Single Pack Floor Coating (Recommended for light to medium foot traffic) Two coats of paint are always recommended 1st coat primes and seals the floor. 2nd coat provides good colour build, protection and longevity of the coating. Single Pack Floor Paints When painting any concrete […]
DESCALING ACID CONCRETE FLOOR CLEANER Economic alternative to diamond grinding, or track blasting dirty and contaminated floors prior to painting concrete floors. DIRECTIONS FOR USE • Can Be Used As Concentrate Or Diluted (approximately 10% with water) • Mop On To Floor • Leave For 2-4 Hours To Do Its Work Floor Will Bubble • […]
Advice for thinning paint to suit application methods There is no rule of thumb when it comes to thinning paint to aid application methods; the reason the percentage of thinners required changes so much is there are lots of different external variants that affect paint. The best advice we can offer is when thinning is […]
Two coats of paint are always recommended, the first coat primes and seals the floor. The second coat provides good colour build, protection and longevity of the coating. With any floor coating preparation is an essential key to extend the protection and lifespan of the coating. To prepare a bare (rough) concrete floor prior to […]